....
.
...
Component Lathes And Functions - The lathe is one kind of
machine tools used for cutting process of the workpiece is done by making an incision in the workpiece where the chisel driven translational and parallel to the axis of the rotating workpiece
Parts on a lathe
1. The rotation speed control lever .
2. The thickness adjustment lever incision and penguliran , in pairs .
3. Lever shaft speed fixed head .
4. Pen safety of the sleeve connection.
5. The hand wheels for movement lengthwise direction .
6. Lever for automatic movement direction running lengthwise and crosswise .
7. Screw the locking slide .
8. The hand wheel drive transverse glide .
9. chisel home the locking lever (tool -post ) .
10. lever lock position (support ) .
11. The locking lever head off .
12. The hand wheel shaft drive off the flashlight head .
13. The position of the locking lever off the flashlight head .
14. Screw - locking screw loose head position .
15. Pointer movement distance support in the longitudinal direction .
16. The main switch ( key )
lathes component
- Table of machine
- Headstock
- Tailstock
- Compound slide
- Across slide
- Toolpost
- Leadscrew
Fuctions of component
1.Tailstock to hold or support the workpiece on the end opposite the chuck (pencekam) in the machining process in a lathe.
2.Lead crew is long threaded shaft that is located slightly below and parallel to the bench, extending from head to tail remains fixed. Connected with the gear on the fixed head and rotation can be reversed. Mounted to a carrier (carriage) and used as a steering to create a threaded screw only and can be removed when not in use.
3.Feedrod located under the steering screw that serves to channel the power of fast converter box (quick change box) to move the apron mechanism in the transverse or longitudinal direction.
4.Carriage consists of a sled, chisel holder and apron. Strong construction is due to be supporting and directing the cutting chisel. Equipped with two cross slides to direct the chisel in the transverse direction. Spindles on controlling the movement of the chisel holder and spindle top to move the carrier along the runway.
5.Toolpost used as a place holder lathe chisel, using a chisel holder.
6.Headstock is where lay the transmission of motion on a lathe that regulates rotation needed in the process of turning.
Are you know
piston and function ?in this site provide that article
